'54 Ford Club of America - Forum
http://1954ford.com/forum/

Borgeson Power Steering Conversion
http://1954ford.com/forum/viewtopic.php?f=32&t=4653
Page 1 of 1

Author:  1red54 [ Fri Apr 12, 2019 11:28 am ]
Post subject:  Borgeson Power Steering Conversion

Has anyone installed the Borgeson Power Steering Conversion Kit? I'm in the middle of doing this conversion thinking it was a straight bolt up. The gear box doesn't clear the frame. Called Borgeson and they told me that sometimes that needs to be done. I find it hard to believe that '54 frames vary from one to another that much. I've ground a pretty good amount to gain the clearance. Just wondering if anyone else has tackled this project and what problems they've run into?
Thanks in advance,
Alan Wood

Author:  hotrodprimer [ Sat Apr 20, 2019 5:36 pm ]
Post subject:  Re: Borgeson Power Steering Conversion

Alan, I have been building cars for the past 50 years and I have yet to see anything that bolts up without a little fabrication.

Author:  dueceswild [ Fri Apr 26, 2019 5:07 pm ]
Post subject:  Re: Borgeson Power Steering Conversion

Attachment:
File comment: borgenson p.s.
borgeson 1 - Copy.jpg
borgeson 1 - Copy.jpg [ 273.12 KiB | Viewed 8159 times ]
Hi Alan ,just saw your ?? on the borgeson p.s. pump install . we installed one on my 54 . it bolts right into stock frame holes and with the correct measurements the stock 54 shaft is a straight shot to pump spline without any knuckle joints .Borgeson does not give the correct info on installing the pump . If you need info on what we did to install P.M. me. It helps if your engine is out of engine bay ,as we are doing the whole car over it was the perfect time to install it. Dave NOTE : THIS SETUP WILL NOT WORK WITH STANDARD SHIFT :( ,, ONLY AUTOMATICS

Author:  Fatso54 [ Wed Jun 19, 2019 5:34 pm ]
Post subject:  Re: Borgeson Power Steering Conversion

Where do I find this kit? Or can someone tell me what part number the power steering gear box is? I can find the pump easily enough, and make my own hoses. Ive got a 54 customline with a 302/c4 in it, if that makes a difference? Thanks for any and all help.
John

Author:  dueceswild [ Fri Jun 21, 2019 9:14 am ]
Post subject:  Re: Borgeson Power Steering Conversion

Hi John , here is some info on power steering box ,, hope it helps ,, let me know if I can give u any more info ,,dave
Attachment:
SUNLINER 7 - Copy (2).jpg
SUNLINER 7 - Copy (2).jpg [ 205.29 KiB | Viewed 7286 times ]

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/